afx light SCAN1000FX5-RGB Manuel D'utilisation page 7

control by PC, when disconnect the unit, it will be preprogrammed program control。
In the theory, as long as it is ILDA B25，It can control this unit, but in the reality, some of the software can not

control this unit, for the 4 pin and the 17 pin of the output card has not connect. In fact this is an easy problem.
As long as you connect them. It can control this unit.
DMX Channels Chart When ILDA is connected
CHANNEL VALUE
000-004
CH1
005-127
Grating
128-133
Rotation
134-255
000-031
032-063
CH2 064-095
096-127
Grating Effect
128-159
160-191
192-223
224-255
DMX Channels Chart When ILDA is NOT connected
CHANNEL
CH 1
MODE
©Copyright Lotronic 2017
DESCRIPTION
No grating rotating
Clockwise grating rotating
No grating rotating
Anticlockwise grating rotating
Laser 3D Effect
Scanned Beam Effect (Pattern Effect)
Laser Lumia Effect
Scanned Beam Effect (Pattern Effect)
Burst Grating Effect
Scanned Beam Effect (Pattern Effect)
Laser Universal Effect
Scanned Beam Effect (Pattern Effect)
VALUE
000-018 Laser OFF
019-036 AUT Auto Show with Mixed 5 effect
037-054 A3D Laser 3D Effect Auto Show
055-072 AUB Scanned Beam Effect Auto Show
073-090 AUL Laser Lumia Effect Auto Show
091-108 AUN Burst Grating Effect Auto Show
109-126 AUO Laser Universal Effect Auto Show
127-144 SOU Sound Show with Mixed 5 Effect
145-162 S3D Sound show with LASER 3D
163-180 SOB Sound show with Scanned Beam
181-198 SOL Sound show with LASER LUMIA
199-216 SON Sound show with Burst Grating
217-234 SOO Sound show with Laser Universal
235-255 DMX MODE
FUNCTION
7