13.4
Disposal
Observe the national waste disposal regulations. Never dispose of the machine, machine
components or operating equipment in the residual waste. If necessary, contact your local
authorities for information regarding available disposal options. If you purchase a new
machine or equivalent equipment from your specialist dealer, he is obliged in certain
countries to dispose of your old machine properly.
14
TROUBLESHOOTING
Always stop the machine before carrying out any conversion, adjustment,
cleaning or maintenance work and secure it against unintentional restarting.
Put on your personal protective equipment.
If you find yourself unable to carry out necessary repairs properly and/or do not have the required
training to do so, always consult a specialist to fix the problem.
Trouble
machine does not run
or only runs for a
short time /
Short operating time
(less than 1-3 hours
per charge) /
Machine runs very
sluggishly /
Battery lamps do not
light up
Sometimes the
machine runs,
sometimes not
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
W A R N I N G
Possible cause
Battery is too weak
Charger does not work
Loose cable or plug
Empty battery
Motor damage
Overcharged batteries
Machine is overloaded
Loose cable or plug
Motor or electrical damage
TROUBLESHOOTING
Solution
Make sure that the charger's
connections (to the battery and to
the power outlet) are correct.
Make sure that the power supply to
the socket is set to "ON".
Check with a voltmeter.
Contact customer service.
Check all plugs and cables for
correct connection.
Charge battery.
Replace motor.
In case of overcharging, contact
customer service.
Observe loading capacities and
operating conditions; see chapter
Technical data.
Check all cable connections for tight
fit.
Contact customer service.
31
ZI-ED500