Publicité
11.2
Assembly
The machine is mostly pre-assembled, the components dismantled for transport are to be assembled
according to the following instructions and the battery is to be connected.
12 OPERATION
Only operate the machine when it is in perfect condition. A visual inspection of the machine must be carried
out before each operation. Safety devices and operating elements must be checked carefully. Check screw
connections for damage and tight fit.
12.1
Operating instructions
Always guide the machine with both hands. Steer the machine smoothly, without jerky
movements.
Adjust the speed to the environment.
Do not overload the machine.
Distribute the load evenly.
Always move parallel to the slope.
Turn on the lights when visibility is poor.
Pay special attention to the driving area and surroundings when reversing.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
Mount lighting
Mount the lighting at the intended
location on the control panel. To do this,
use an M8×20 hexagon screw together
with a washer (1).
Mount handles
Fix the left and right handles with 4
hexagon screws M8×25 and washers each
(2).
Mount drive and steering wheels
Fix both drive wheels (3) with 4 hub nuts
and spring washers each.
Mount the axle with steering wheels on
the machine frame (4).
OPERATION
25
ZI-ED500
Publicité
