Zipper Maschinen ZI-ED500 Mode D'emploi page 26

12.2 Checklist before each use

General visual check: Check all connecting parts for tightness, tighten if necessary.
 Check battery status on control panel.
 Check function of coupling lever.
 Check that the dumper box is in the fully lowered position.

Check brake function.
12.2.1 Check battery status
12.3 Operation
12.3.1 Switch the machine on and off
12.3.2 Driving on level ground
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at

Set battery switch to ON (1).
 Set key switch to ON (2).

Read battery status (3).
 Charge battery
Maintenance.
 Set key switch to OFF (2).

Set battery switch to OFF (1)
Switch on
 Set battery switch to ON (1)

Make sure that the coupling lever (2) is not operated
(2).

Set the key switch to ON position (3).
Switch off
 Set the key switch to OFF position (3).

Set the battery switch to OFF (1).
Move machine

Switch on the machine; see previous chapter

Engage forward or reverse gear (4).
F = forward
o
R = reverse
o

Select the speed level (5).
I = low
o
0 = middle
o
II = high
o
 Press the coupling lever (2).

Slowly press the throttle lever (6).
 The machine moves in the selected direction.
Stop machine

Slowly release the throttle lever (6) and the coupling
lever (2). The machine stops.

Switch off the machine; see previous chapter.
OPERATION
if necessary, see chapter
26
ZI-ED500