Publicité
12.3.3
Driving on slopes
Observe the following additionally when driving on slopes:
Always use the lowest speed setting when driving on slopes.
Never drive in reverse gear on slopes.
Be careful when starting, stopping and steering the machine.
Drive at low speed on unstable surfaces.
Avoid tight, U-shaped turns.
12.3.4
Driving with load
Check the following before driving with load:
Before using the machine, check that the dumper box is completely in a horizontal position.
Observe the maximum permissible load weight!
The load must not protrude beyond the box panels. The load must not restrict the operator's
view.
The load should be positioned evenly in the dumper box. Pay attention to the balance of the
machine when driving with heavy loads.
Secure the load to the attachment hooks with ropes or straps. Do not attach the ropes to other
parts of the machine. Only use ropes and straps that are in perfect condition.
Reduce the load in case of slope and / or unstable ground.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
Steer machine
The swivelling steering wheels can be fixed, so that
only a straight movement of the machine is possible.
To do so, engage the bolts (7) in the holes on the
plate.
To steer the machine in a desired direction, the bolt
(7) must be in the upper position so that the wheels
are free to move. Pulling the left/right handle (8)
controls the swivelling steering wheels and moves
the machine in the turn-in direction of the wheels.
Level ground
Max. load: 500 kg
Max. loading height from the floor surface of the
dumper box: 800 mm
Slope conditions
0–10°: 200 kg
10–15°: 100 kg
Max. loading height from the bottom of the dumper
box:
300 mm for descent
o
500 mm for the ascent
o
OPERATION
27
ZI-ED500
Publicité
