Publicité
12.3.5
Unloading
Before unloading the load, stop the machine.
Pay attention to the change of the center of gravity when unloading. Never dump on soft ground.
Before unloading, make sure that there are no people, animals or obstacles in the
vicinity.
12.3.6
Stop in case of emergency
Release the throttle lever and the clutch lever.
Switch off the battery switch.
13 CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Position the machine on a level and stable surface before starting any cleaning or maintenance work.
Always stop the machine before carrying out any conversion, adjustment,
cleaning or maintenance work and secure it against unintentional restart.
Put on your personal protective equipment.
13.1
Cleaning
Regular cleaning guarantees the long life of your machine and is a prerequisite for its safe operation.
Incorrect cleaning agents can attack the paint of the machine. Do not use solvents,
nitro thinner or other cleaning agents for cleaning, as these can damage the
machine's coating.
Observe the specifications and instructions of the cleaning agent manufacturer.
After each use, remove chips and dirt from the tires and the dumper box.
13.2
Maintenance
The machine is low-maintenance and contains only few parts that the operator must subject to
maintenance. Have malfunctions or defects that may affect the safety of the machine eliminated
immediately.
Before each operation, check the perfect condition of the safety devices.
Regularly check the perfect and legible condition of the warning and safety stickers on the machine.
Use only faultless and suitable tools.
Use only original spare parts recommended by the manufacturer.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
N O T E
Press the switch (1) forward. The dumper box is
automatically raised until the desired position is
reached and the load is emptied.
Press the switch back. The dumper box lowers to
the original position (1).
W A R N I N G
N O T E
28
ZI-ED500
Publicité
