Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SAFE L
10
2 50
REGE T
11
2:00
PRESS
12
4
FUL RG
13
5
14
STEPS
FORCED
15
NONE
RESET
16
OFF
ROUTINE MAINTENANCE
This maintenance level may be handled by anybody having carefully taken into account the following guidelines. It is highly recommended to follow
them so that the softener keeps its performances in the long term.
Maintenance guidelines
Check the salt level in the tank
Setting check
Time change
Change the filter element of the filter (7)
There are various models of filters. To change the filter element:
•
Cut the water upstream and downstream
•
Let the pressure drop with the purge screw upon the filter
•
Unscrew the filter transparent bowl and remove the filtering
consumable
•
Replace it by a new one
•
Screw the bowl back, tightening it gently
Overall checkup, cleaning, protection
•
Use the AQA clean pack or equivalent, providing the adapted
products and specifying their proper use in its manual.
•
Check the raw water hardness upstream and the softened water
hardness downstream of the device, using the analysis kit.
ADVANCED MAINTENANCE
For a durable performance of the device, the following key points shall be yearly checked by a professional. Please read the manufacturer's web
pages dealing with Service, to find the proposed service contracts and the checks they include.
MAINTENANCE CHECK LIST
- Check the water hardness up- and downstream from the softener
- Check controller settings
- Check and clean (if needed) the brining line (replacement if worn or damaged)
- Check and clean (if needed) the salt tank
- Check inner components (replacement if worn or damaged)
o Inlet filter
o Injector
o Moving parts: solenoid valves, membrane, inner valve shaft
o Wire of the water meter
o Chlorination cell (on models with this option)
o Proportional regeneration block (on models with this option)
- Check tightness and integrity of the in- and outlet flexible hoses (replacement if damaged)
- Check the regeneration steps
- Check the overall tightness of the softener and its satellites
Safe level value = remaining capacity value which triggers the regene-
ration once reached.
Time of regeneration start.
Water network pressure. To be set for proportional regeneration
purpose.
Frequency of the full regenerations (to prevent from loss of capacity
occurring with time), for the softeners with proportional regeneration
function. Here: one full regeneration every 5 regenerations.
Setting of each regeneration step durations.
The followings step durations can be adjusted (one submenu for each):
Backwash (BACKW) ; aspiration (ASPI) ; fast rinse (FAST) ; brine pre-
paration (propor. regen.) (BRINE) ; tank refill (propor. regen.) (REFILL)
Turn ON or OFF the automatic forced regeneration after a long time
without water consumption
Reset back on initial factory settings
ROUTINE & ADVANCED MAINTENANCE
Code P0011144GR - Rev 10 - 05/03/2019
- 16-
Frequency and consumables
Every week, or if alarm. Refill as far as needed.
Concerning the devices with the salt level follow-up by smartphone app:
keep in mind to enter the salt level reached after refill, as explained in
the chapter OPERATION
Check the time on the display.
The seasonal time change is not automatic. Change the time following
the procedure explained in the chapter SETTING.
Every 6 months or more often if you notice a significant pressure drop
at the taps.
Once a year:
- Pack AQA clean including:
•
Hardness kit
•
Cleaning liquid
•
Resin protector
- Standalone hardness kit
- Standalone cleaning liquid
êé to change
OK to confirm
çM to cancel
êé to change
OK to confirm
çM to cancel
êé to change
OK to confirm
çM to cancel
êé to change
OK to confirm
çM to cancel
OK to enter the menu, otherwise
çM then
êé to change
OK to confirm
çM to cancel
êé to activate
OK to confirm
çM to cancel
êé to turn ON
OK to confirm (twice)
çM to cancel
Publicité
Chapitres
Table des Matières
