Télécharger Imprimer la page

Emerson AVENTICS DS1 Notice D'instruction page 22

Publicité

7.1.6 Changing the user preferences
<
Password
1
2
3
4
5
6
7
8
9
0
OK
Cancel
-
Brightness
+
Dimming
after
0...?min
back
Rotate
180°
Screen
back
English
Language
Deutsch
Spanish
French
back
back
Fig. 14: Submenu User Setup: User Preferences
Changing the password
Table 1: Composition of the password
Length
Usable characters
Enter the new password twice.
u
Changing the screen brightness
1. Use the + and – buttons to adjust the brightness.
2. Select the back button.
3. Confirm with the OK button.
Setting the automatic display dimming
1. Select the Dimming after checkbox.
2. Enter the time in minutes until the display is dimmed.
Changing the display language
1. Select the desired display language.
2. Select the back button.
3. Confirm with the OK button.
AVENTICS™ DS1 | R412029167-BAL-001-AA | English
4
Numbers
7.1.7 Configuring the channels
Channel 1/
State
Channel 2
Unit
Scale
4mA
Scale
20mA
Fig. 15: Submenu 4...20 mA: Configure Channels
Configuring channel 1
1. Configure State, Unit, Scale 4 mA and Scale 20 mA.
2. Select the back button.
3. Confirm with the OK button.
4. Select the Save button.
Optional: Configure channel 2
1. Configure State, Unit, Scale 4 mA and Scale 20 mA.
2. Select the back button.
3. Confirm with the OK button.
4. Select the Save button.
Resetting a channel configuration
1. Under State, Unit, Scale 4 mA and Scale 20 mA: Select the CLR button.
2. Select the Save button.
Configuring error messages
back
Save
Cancel
2 mA
Error
22 mA
Current
None
<4 mA
>20 mA
back
back
Fig. 16: Submenu 4...20 mA: Configure Error Messages
1. Select the mode.
2. Select the Save button.
Table 2: Modes for issuing the analog output in the event of an error message
Mode
Error type
2 mA
Sensor error/system error
22 mA
None
3.8 mA ... 20.5 mA
on
off
back
°C
%
°Ftd
°Ctd
g/kg
mg/m³
g/m³
°F
<<
back
+/-
0...9999
CLR
back
+/-
0...9999
CLR
back
Output to Namur
22

Publicité

loading