Publicité
• Also observe any additional storage information on the product packaging.
4.3 Returning the product
• Before returning the product: Get in touch with our contact address. See back
cover.
• Observe the storage conditions until such time as you return the product.
5 Product description
5.1 Brief description
The product is intended for measuring the dew point.
5.2 Labeling and identification
Product identification
The ordered product is clearly identified by the material number. The material
number can be found in these locations:
5.3 Product overview
8
7
6
Fig. 1: Product overview DS1
1 Plug connector M12, 5-pin, A-coded
3 Plug connector M12, 8-pin, X-coded
5 Sinter filter
7 Display
AVENTICS™ DS1 | R412029167-BAL-001-AA | English
1
2
3
4
5
2 Name plate
4 Ethernet component
6 OK button
8 UP button
5.4 Display
15
14
13
12
Fig. 2: Main menu
1 Humidity grade
3 Saturation vapor pressure
5 Min. pressure dew point in °Ctd
7 Min. temperature in °C
9 Page displayed
11 Software version
13 Temperature in °C
15 Absolute humidity
5.5 Basic operation
The product has 2 buttons for operation below the display:
Button
Graphic
Designation
UP
OK
6 Assembly and installation
Before you start with the installation: Familiarize yourself with the basic specifica-
tions for assembly as early as possible in advance. See
g 6.2 Preparation.
6.1 Planning
6.1.1 Installation conditions
General requirements
• Make sure that the product is installed in a manner that protects it from all
types of mechanical loads.
Product-specific requirements
• Mounting orientation. See
g 14. Technical
Ambient conditions
• Keep the installation location free from vibration.
• Protect the product from direct sunlight and UV radiation.
6.1.2 Assembly options
• Direct assembly in the compressed air mains. See
the compressed air
mains.
• Indirect assembly in the compressed air mains. See
in the compressed air
mains.
16
13
1
5
6
7
8
11
10
9
2 Vapor ratio
4 Reference dew point
6 Max. pressure dew point in °Ctd
8 Max. temperature in °C
10 Modbus ID
12 Hardware version
14 Pressure dew point in °Ctd
16 Relative humidity
Function
Select menu items, change values, change
displayed page in main menu
Confirm selection, confirm change
g 6.1 Planning
data.
g 6.3.1 Direct assembly in
g 6.3.2 Indirect assembly
2
3
4
and
17
Publicité
