Getting Ready For Use; Releasing The Cloth Holder; Attaching The Cleaning Cloth To The Cloth Holder - Vorwerk KOBOLD SPB100 Manuel D'utilisation

54
6.3

GETTING READY FOR USE

6.3.1 Releasing the cloth holder

1. Attach the DuoClean to the cordless vacuum cleaner as
described in the chapter
2. Put the cordless vacuum cleaner in the standby position as
described in the chapter
position [} 53].
3. Tilt the cordless vacuum cleaner backwards in the standby
position (1).
ð The DuoClean is now positioned on its rollers.
4. Press the pedal (three green strips) positioned at the back of
the DuoClean on the left with your foot (2).
ð The cloth holder is released from the device (3).
It is only possible to eject the cloth holder when the cordless
vacuum cleaner is tilted backwards on its rollers in the standby
position.

6.3.2 Attaching the cleaning cloth to the cloth holder

1. To attach the cleaning cloth to the cloth holder, push the
green nose (1) of the cleaning cloth into the slot on the cloth
holder as far as it will go.
2. Then press the cloth holder directly onto the cloth (2).
ð The back of the cloth is fastened to the cloth holder panel using
Velcro and fits into place (3).
3. The cloth must not be positioned at an angle to the cloth
holder.
Attaching the accessory head
Setting and releasing the standby
[} 53].