Recommendations For Moisture Settings - Vorwerk KOBOLD SPB100 Manuel D'utilisation

Faults
All waves lit up red.
Hard floor type
Sealed/varnished wooden floors
(floorboards, parquet)
Oiled/waxed wooden floors
Unsealed/untreated wooden floors ++
Sealed cork floors
Oiled/waxed cork floors
Unsealed/untreated cork floors
Laminate
Elastic floors (PVC, cushion vinyl,
linoleum)
Stone floors
(marble, granite, Jura limestone,
artificial stone)
Porous/delicate natural stone
(slate, clinker tiles)
Clay floors (terracotta, clinker, brick
clay tiles)
Ceramic glazed tiles and fine
stoneware
Untreated tiled floors
Rough concrete flooring (washed
concrete)
Textile flooring
The symbols mean: ++ excellent suitability + good suitability - not suitable
The DuoClean has detected a fault.

6.6.5 Recommendations for moisture settings

Dry mode
++
++
++
+
+
++
++
++
++
++
++
+
excluded
excluded
Note: The optimum moisture setting is also dependent on the speed
with which you work. The quicker you work, the higher the
moisture setting you can select.
If the floor becomes too wet while working with the DuoClean,
you can switch to a lower setting. (Further tips can be found
under Troubleshooting
Setting 1 Setting 2
++ +
+ –
– –
++ +
– –
– –
++ +
++ ++
++ ++
++ ++
++ ++
++ ++
– –
[} 64].)
59
Setting 3
+
–
–
+
–
–
+
++
++
++
++
++
–