(3) The operator should wear an anti-static hand strap
EN
on the wrist. This hand strap should have good grounding
performance. This measure is the most effective.
6. The basic performance of the product:
red light mode – radiation intensity Ee ≤ 96 mW/cm
blue light mode – radiation intensity: Ee ≤ 120 mW/cm
7. The guidelines and the company's statement are shown in
Table 1 to Table 4:
This product meets the electromagnetic compatibility
requirements of IEC60601-l-2/AMD1:2020 PRV idt
lEC60601-l-2:2004; Guidelines and manufacturer's declaration
– electromagnetic emissions – for all equipment and systems
Table 1 Electromagnetic radiation
(corresponding to Table 201 in lEC 60601-l-2/AMDl:2020 PRV)
Guidelines and manufacturer's declaration – Electromagnetic emissions
The product is expected to be used in the electromagnetic environment specified below.
The purchaser or user of the product should ensure that it is used in the electromagnetic
environment.
Launch test
RF emission
CISRP11:2O16
RF emission
CISRP11:2O16
Harmonic emission
1EC 61000-3-2:2009
Voltage fluctuation/flicker
emission
1EC 61000-3-2:2009
Guidelines and manufacturer's declaration – electromagnetic immunity
– for all equipment and systems: This product is expected to be used
in the electromagnetic environment specified below. The purchaser or
user of this product should ensure that it is used in this electromagnetic
environment.
29
Compliance
Team 1
Type B
Type A
Correspond
2
.
2
Electromagnetic
environment-guide
The product uses radio
frequency energy only
for its internal functions.
Therefore, its radio
frequency emission is very
low and the possibility of
causing interference to
nearby electronic equipment
is very small.
The product is suitable for
use in all facilities, including
households and directly
connected to the residential
public low-voltage power
supply network for house-
holds.