Publicité
Installation Instructions
INSTALLING -ELECTRICAL CONNECTIONS
A. When making the wire connections, use the entire length of conduit provided.
The conduit must not be shortened.
B. With the cooktop in place, open the front of the cabinet door.
C. Insert the wires from the conduit through the opening of the junction box.
D. Connect the red and black leads from the cooktop conduit to the corresponding
leads in the junction box.
E. Once the connections are made, secure wires together using wire nuts.
GROUNDING INSTRUCTIONS:
The bare ground wire in the conduit is connected to the cooktop frame. Effec-
tive January 1, 1996, the National Electrical Code will not permit grounding
through neutral. If used in new construction after January 1, 1996 or in a
mobile home, recreational vehicle or if local codes do not permit grounding
through the neutral white lead, attach the appliance grounding lead (green
or copper) to the residence grounding conductor (green or bare copper) in
accordance with local codes.
IMPORTANT:
If the cooktop is being installed into a blind counter (one with no cabinet opening
below), wire connections must be made before putting the cooktop into the cutout
opening.
19
Publicité
