Publicité
Using the surface elements.
Heat Settings
The settings below are guidelines only. The exact setting will depend on several
factors, including your cookware and the amount you are cooking. Experiment with
the induction cooktop to find the settings that best suit you.
Heat setting
1-2
● Delicate warming for small amounts of food
● Melting chocolate, butter, and foods that burn quickly
● Gentle simmering
3-4
● Reheating
5-6
● Pancakes
7-8
● Cooking pasta
9
● Stir-frying
Hints and Tips
1. The induction cooktop cannot be turned on.
Make sure the induction cooktop is connected to the power supply and that it is
switched on. Check whether there is a power outage in your home or local area. If
you've checked everything and the problem persists, call a qualified technician.
2. The touch controls are unresponsive.
The controls are locked. Unlock the controls. See section using your induction
cooktop for instructions.
3. The touch controls are difficult to operate.
There may be a slight film of water over the controls or you may be using the tip of
your finger when touching the controls. Make sure the touch control area is dry and
use the ball of your finger when touching the controls.
4. The glass is being scratched.
Tough-edged cookware. Unsuitable, abrasive scourer or cleaning products being
used. Use cookware with flat and smooth bases. See "Choosing the Right Cook-
ware" and "Care and Cleaning" for further advice.
5. Some pans make crackling or clicking noises, this is normal.
This may be caused by the construction of your cookware (layers of different metals
vibrating differently).
6. The induction cooktop makes a low humming noise when used on a high heat
setting. This is caused by the technology of induction cooking. This is normal, the
noise should quieten down or disappear completely when you decrease the heat
setting.
7. Fan noise coming from the induction cooktop.
A cooling fan built into your induction cooktop has come on to prevent the electronics
from overheating. It may continue to run even after you've turned the induction
cooktop off. This is normal and needs no action. Do not switch the power to the
induction cooktop off at the wall while the fan is running.
8. Pans do not become hot and " " appears in the display.
The induction cooktop cannot detect the pan because it is not suitable for induction
cooking. The induction cooktop cannot detect the pan because it is too small for the
Suitability
● Slow warming
● Rapid simmering
● Searing
● Bringing soup to the boil
12
● Cooking rice
● Boiling water
Publicité
