Publicité
Using the surface elements.
To lock the controls:
Touch and hold the keylock control for 2s. The timer indicator will show "Lo".
To unlock the controls:
1. Make sure the induction cooktop is turned on.
2. Touch and hold the keylock control for 2s.
3. You can now start using your induction cooktop.
When the cooktop is in lock mode, all controls are disabled, except the ON/OFF.
You can always turn the induction cooktop off with the ON/OFF control in an
emergency, but you would have to unlock the cooktop first in the next operation.
Overheating Protection
The appliance is equipped with a temperature sensor which can monitor the
temperature inside the induction cooktop. When an excessive temperature is
reached, the induction cooktop will stop operation automatically.
Detection of Small Articles
When an unsuitably sized or non-magnetic pan (e.g. aluminium), or some other
small item (e.g. knife, fork, key) has been left on the cooktop, the display flashes " "
and the cooktop will automatically go in the standby mode in 30 seconds.
Auto Shutdown Protection
Auto shutdown is a safety protection function for your induction cooktop. It will
automatically turn off after a certain period of time. The default working times for
various power levels are shown in the below table:
Power level
Default working timer (hour)
When a pot is removed, the induction cooktop can stop heating immediately and
automatically switch off after 1 minute.
!
People with a heart pacemaker should consult their doctor before using
this unit.
Using the Timer
• You can set the timer for a single cooking zone or multiple zones.
• The timer can be set from 1 to 99 minutes for any cooking zone.
Setting the Timer to Turn off One Cooking Zone
1. Touch the heating zone selection control that you want to set the timer for.
2. Touch timer control, the minder indicator will start flashing and "30" will
show in the timer display.
1
2
3
4
8
8
8
4
9
5
6
7
8
4
4
2
2
9
2
6
30
Publicité
