Publicité
Using the surface elements.
To turn off
1.Touch the heating zone selection control that you wish to turn off.
2. In mode 2 state, touch the "keep warm"key again, the corresponding display
shows"-", the keep warm function will be turned off.
3. The keep warm function can work for max. 8h. If no keys are touched, the active
cooking zones will be automatically switched off after 8h.
Using the Bridge （Maximum power 3000W Boost 3600W）
To Turn On a Bridge:
1. Touch the Left side bridge icon.
Indicator above the left side bridge will be illuminated. The heat setting levels for the
cooking areas will default to "0" and can be set from a minimum of "1" to a maximum
of "P." Any timers that may be running for the cooking areas will turn off, and 2
dashes "--" will appear in the timer display.
2. Touch the "-" or "+" control to change the power level up or down. The selected
heat level will show in the heat level display for each cooking area using the bridge.
To Turn Off a Bridge:
1.Touch the bridge for the zone being used.
The bridge cooking areas will resume operation as 2 separate areas.
Boost control
During cooktop operation, touch the heating zone selection control, then touch
the BOOST control, the buzzer beeps once, "P" will show in the display, the
cooktop enters BOOST function, the power increases. BOOST function will run
for 10 minutes, then quit automatically and the cooktop will return to previous
function. In the BOOST mode, touching BOOST again will stop the BOOST
function and will return to the previous function.
Cooking Guidelines
It is recommended to use a pan with a bottom thickness of less than 3mm when
!
frying, otherwise the frying effect is not good. Take care when frying as the oil
and fat heat up very quickly, particularly if you're using the "Boost" function.
At extremely high termperatures oil and fat will ignite spontaneously and this
presents a serious fire risk.
11
Publicité
