Publicité
vehicle manufacturers in the vehicle users' manual.
If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.
Note: This is a i-Size booster seat enhanced child restraint system. It is approved according
to Regulation No. 129, for use primarily in i-Size seating positions as indicated by vehicle
manufacturers in the vehicle user's manual.
If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.
WHEN USE IN REARWARD FACING CONFIGURATION, DO NOT INSTALL THIS CAR SEAT IN
A VEHICLE SEAT WHERE THERE IS AN ACTIVE FRONTAL AIRBAG INSTALLED.
The correct fitting of the ISOFIX connectors, support leg and 3-point belt is of vital importance
for the safety of your child. Use the car seat only on a front-facing seat that is fitted with ISO-
FIX achorages and an automatic 3-point belt that has been approved according to the ECE
R16 standard or similar. Do NOT use a 2-point belt.
This i-Size Enhanced Child Restraint System can be used:
• REARWARD FACING: Child from 40 cm to 105 cm, with a weight ≤18 kg.
• FORWARD FACING: Child older than 15 months, from 76 cm to 105 cm, with a weight ≤18 kg.
• FORWARD FACING: Child from 100 cm to 150 cm.
IMPORTANT!
DO NOT USE FORWARD FACING BEFORE:
• THE CHILD'S AGE EXCEEDS 15 months (Refer to instructions).
• THE CHILD'S STATURE EXCEEDS 76 cm.
IMPORTANT - The booster may not fit to all vehicles for the usage from 135 to 150 cm.
Rigid items and plastic parts of this Enhanced Child Restraint System shall be so located and
installed that they are not liable, during everyday use of the vehicle, to become trapped by a
movable seat or in a door of the vehicle.
Make sure the support-leg is incontact with the floor of the vehicle. If there are storage com-
partments in the floor of the vehicle you must contact the vehicle manufacturer.
Keep all straps used to attach the restraint system to the vehicle taut, and adjust the straps
used to restrain the child. It is also important that the the straps are not twisted.
You should replace this car seat if it is severely impacted during an accident or if it shows
wear and tear.
Make sure the harness buckle is fitted as low as possible to keep the lap section safely across
the child's pelvis.
Under no circumstances should the car seat be altered in any way or should parts be added
to it.
Direct exposure to the sun increases the temperature inside the vehicle. You should therefore
cover the car seat when it is empty so that the parts, especially the buckles, do not heat up
and burn the child.
Never leave your child in the seat unsupervised.
Luggage and all other heavy or sharp objects in the vehicle must be securely held down.
Objects that are not fastened can injure the child if an accident occurs.
Never use the car seat without its cover or use any other cover than that recommended by
the manufacturer. The cover constitutes an integral part of the restraint performance.
Keep the current instruction leaflet in storage location of the car seat for future reference
purposes.
Also refer to the vehicle manufacturer's handbook if any doubt.
5
Publicité
