Publicité
OPERATION
WARNING!
- Make sure the robot is off.
- Ensure the charging plug is detached and the charging port is plugged with the protective cap
before the robot is deployed.
1. Bring the robot to the side of your pool. NOTE: Only deploy the robot from the pool side ( not the pool corner ) and ensure it
is facing outwards as you do so. Unwrap the retrieval cord from the float (note: there are side notches at the top and bottom
of the stem, as well as a narrow slot at the bottom).
The correct length of the rope should be equivalent to the distance between the top of the robot and the water level.
NOTE: Excess length may kink the rope and affect performance as a result.
First, align and attach the retrieval cord to the side notches at the top as you wrap the cord around the stem (step 1 & 2).
Keep wrapping the cord around the top half of the stem until it reaches the required length (step 3). Pull the cord down to the
bottom slot and tuck it in (step 4).
1.
2.
3.
4.
bwt.com
6/147
MAINTENANCE & CLEANING
2021/10 : A
Publicité
