SAFETY WARNINGS & INSTRUCTIONS
Information contained in this Instruction Manual will help you operate the item safely, protect yourself and others
from hazards, and prevent damage to the device and other property.
WARNING!
- This is not a TOY. Children should be kept out of reach from this robot and its accessories
- Never allow children to operate this product.
- This appliance is not intended for use by persons with reduced physical, sensory, mental capabilities, or
a lack of experience and knowledge, unless they are given supervision or instructions concerning the
safe use of the appliance and understand the hazards involved by a person responsible for their safety.
- Children must not play with this product.
- Cleaning and maintenance of the robot must not be carried out by children.
- Make sure the robot is fully immersed in the pool before initiating operation. The minimum water
level required to operate the robot must reach above the swivel head of the robot. Operating the
robot when it is not immersed correctly could damage the unit and void the warranty.
- Maximum operating depth in water is 3 meters ( 10 ft ).
- Operating water temperature: 5˚C ( 41˚F ) – 35˚C ( 95˚F ).
-
Detachable supply unit ( external adaptor ).
- The robot should only be recharged with the external adaptor and charging plug delivered with this
product.
- For the purposes of recharging the battery, only use the detachable supply unit ( external adaptor
model number: DSS18-0842000-B / DSS18-0842000-C / DSS18-0842000-D / LX084200 ) that
provided with this robot to charge the battery.
- Connect the external adaptor to a power source through a residential current device ( RCD ) / a
ground fault circuit interrupter ( GFCI ). If in doubt, consult a qualified electrician.
- Do not use this robot if any damage is detected.
- Replace damaged parts with ones that are certified by the distributor or manufacturer.
- Turn off the robot, disconnect the external adaptor from the power source, and unplug the external
adaptor from the charging plug, before detaching the robot from the charging plug.
- Disconnect the robot from the supply mains and make sure the robot is OFF prior to carrying out
regular maintenance – such as cleaning the filter, swivel smoothing-ring, and the areas around the
water sensors and charging port.
- Do not attempt to replace the installed rechargeable Li-ion battery pack.
- DO NOT handle the robot, external adaptor, and charging plug while it is charging with wet limbs
and without shoes.
- You should not operate this robot when people and/or pets are present in the water.
- DO NOT use this robot without an intact filter in place, otherwise your warranty will be voided as a
result.
- Suction entrapment hazard: This robot generates suction. Do not allow hair, body, and any loose
parts of your clothing to make contact with the suction hole of the robot during its operation.
- Never insert body parts, clothing, and other objects into the openings and moving parts of the robot.
- DO NOT use this robot to pick up any toxic substance, flammable, and combustible liquids ( i.e.
gasoline ) in the presence of explosive or flammable fumes.
bwt.com
MAINTENANCE & CLEANING
SAVE THESE INSTRUCTIONS
2021/10 : A
1/147