Télécharger Imprimer la page

BWT BC200 Manuel D'utilisation page 5

Publicité

3. Connect the external adaptor to the power source. The indicator light on the external adaptor turns
red once the charging begins. The indicator light on the external adaptor will turn green when the
robot is charged.
• Immediately disconnect the external adaptor from the power source if you detect any of the
following:
4. When charging is complete, disconnect the external adaptor from the power source and unplug the
charging plug from the unit and external adaptor.
Normally the robot can operate up to 90 minutes on a full charge.
NOTE: Clean the debris compartment regularly. Excessive debris inside the debris compartment increases the burden to the
motor operation and shortens the operating duration as a result.
NOTE: Rechargeable lithium-ion battery is classified as a consumable item. It has a limited life and will gradually lose its
capacity to hold a charge. Therefore, the running time of the robot will gradually reduce after repeated charging and
discharging throughout its product life.
Once the lifespan of the battery reaches its end, refer to section "BATTERY DISPOSAL" for instructions regarding battery
disposal and replacement of swivel head.
NOTE: Let the robot rest for around 30 to 40 minutes before charging it again.
Set- up Before Use
Adjustment of Trajectory
bwt.com
MAINTENANCE & CLEANING
- Offensive or unusual odor
- Excessive heat
- Deformation, cracks, leaks
- Smoke
5-6h
RED light - Charging
GREEN light - Charged
4/147
2021/10 : A

Publicité

loading

Ce manuel est également adapté pour:

Bc200+Bc serie