Publicité
CAUTION!
If a battery leak occurs, avoid any contact with the leaking fluids and place the damaged battery in a plastic bag.
- If leaking fluids come in contact with skin and clothing, wash immediately with plenty of soap and water.
- If leaking fluids come in contact with eyes, do not rub eyes, immediately flush eyes with cool running water for at least 15
minutes and do not rub them. Seek medical attention as soon as possible.
How to remove the battery pack for battery disposal ( To be done by authorized technician )
Recommended tools ( not included ): Screwdriver.
1. Follow section "EMPTYING THE DEBRIS COMPARTMENT" to release the top cover
( preassembled with the swivel head ). Place the cover upside down and use the screwdriver to
unfasten the screw on the bottom locking plate. Turn the bottom locking plate anticlockwise to
release the swivel head. Remove the swivel smoothening - ring.
2. Use the screwdriver to unscrew the 4 screws located at the bottom of the head to release the
bottom plate first. Then unscrew all the screws at the base as shown. Remove the impeller and
pry open the base to expose head inside.
3. Remove out the battery pack to expose the PCBA. To detach the battery connection wire, press
on the clip of the connector to pull it out. NOTE: Wrap the connector immediately with insulating
tape in order to avoid any short circuit caused by the contact of both wire terminals.
bwt.com
MAINTENANCE & CLEANING
10/147
2021/10 : A
Publicité
