Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
First put the base into registration mode:
•
Press and hold the paging
•
The
LED will start to blink on the base for 90 seconds. During that time the base is ready to register a handset.
On the handset:
•
Select Menu to open the menu.
•
Select Registration with the navigator and press OK.
•
Select Register Handset with the navigator and press OK.
•
Select the number of the base to be associated with the handset (1 to 4). Confirm by pressing OK.
•
Enter the system PIN (0000 by default) and confirm with OK. A series of numbers appears on the screen,
representing the base ID. Confirm with 0K. Your handset is registered.
10.2 REMOVING A HANDSET
This procedure needs to be carried out on a different handset from the one you want to uninstall.
•
Select Menu by pressing the left menu key.
•
Select Registration with the navigator and press OK.
•
Select De-register with the navigator and press OK. Enter the system PIN (0000 by default) and press OK.
•
Select the handset to uninstall with the navigator and press OK.
10.3 SELECT A BASE
You can switch your Butler 5400 handset between bases. You can also set it to automatically base select with the
strongest signal. The handset must first be registered with each base individually.
•
Press MENU then scroll to Registration and press OK.
•
Scroll to Select Base then press OK. The current base being used is highlighted.
•
Select the base you want or select Automatic to connect to the base with the strongest signal. Press OK.
Note: When you do Automatic base selection, the handset will only search in standby for the strongest base when it's
out of range on the current base (not during communication)!
10.4 USING THE INTERCOM FEATURE
10.4.1 Calling an internal handset
•
Press INT. The screen displays "Internal Call".
•
Enter the internal handset number.
10.4.2 Transfer a external call to another handset
During a external call:
•
Press INT.
•
Enter the number of the handset you want to call. Your external correspondent is placed on hold. When the internal
correspondent answers, press
retrieve the external correspondent or to go from one to the other.
10.4.3 Conference call
You can talk between 2 handset and a external line at the same time. During an external call:
•
Press INT.
•
Enter the number of the handset you want to call. Your external correspondent is placed on hold.
•
When the internal correspondent answers, press '#' for 2 seconds. If the internal correspondent doesn't answer,
press INT to retrieve the external correspondent.
10.4.4 TAKING AN EXTERNAL CALL DURING AN INTERNAL COMMUNICATION
When you are on intercom with another handset, you can still pick up outside calls.
To take an incoming call:
•
Press
. The internal communication is interrupted.
•
Then press
.You are in communication with the outside caller.
20
button on the base until you hear two beeps.
to transfer the call. If the internal correspondent doesn't answer, press INT to
Topcom Butler 5400
Topcom Butler 5400
Publicité
Table des Matières
