Télécharger Imprimer la page

MITJAVILA PERGO-BSO-H3-PARA Instructions D'installation page 8

Publicité

5 Front cassette awnings connection.
Note :
6
Front cassette awnings assembly. Example with straight post + drainage in the ground.
PLB9041
A Glue the ring to the cassette
B Guide the PVC tube over the ring.
Note :
Optionally, glue the tube to
the ring to hold it in place for further
operations.
Page 8
Factory-fitted connection.
seal the front cassette awnings.
Tube PVC Ø50mm. Not supplied.
awnings.
PLB9041
Fixing the connector.
3 x DIN912M8x20 + rondelle Ø8
Make sure the posts are securely
Tube protrudes below ground level
for draining into the ground.
Straight post.
C Fix the post to the cas-
sette awnings.
N°6
4 x DIN912M8x14mm + rondelle Ø8mm
N°6
ATTENTION,
fastened to the front cassette
awnings. Risk of falling.

Publicité

loading

Produits Connexes pour MITJAVILA PERGO-BSO-H3-PARA