Télécharger Imprimer la page

MITJAVILA PERGO-BSO-H3-PARA Instructions D'installation page 32

Publicité

8 Front cassette assembly. Example with straight post + water drainage elbow.
A Position the drain.
Note :
Identify the side where the water drain will be loca-
ted.
Attention,
The water drain must face away from the
pergola.
Assemble the elbow.
Cut the ring if
necessary.
Note :
make a seal
between the ring
and the PVC elbow
(not supplied).
B Position the post level with the drain. See paragraph A page 31.
C
PLB9041
Glue the ring onto the cassette.
Page 32
Mechanise the post to allow the ring to pass through.
Note :
determine the length of
your PVC tube so that you have a
clearance of 3mm with the ST4707
Ø50mm PVC tube. Not supplied.
Ø50mm PVC elbow. Not supplied.
PLB9041
ATTENTION,
Make sure that the posts are firmly
attached to the front cassette. Risk
of falling.
Note :
Post-mounted drainage
can be oriented as you wish.
Choose the face of the post to
be mechanised to obtain the
desired orientation of the drain.

Publicité

loading

Produits Connexes pour MITJAVILA PERGO-BSO-H3-PARA