shark S-DRAK 2 Manuel D'utilisation page 9

A
C
DISMANTLING THE INTERIOR.
- Turn your helmet over.
- Unhook the velcro of the two cheek pads
(Fig. A-B)
- Remove the neck pad by holding one of its
sides (Fig. C).
- To complete the operation, unclip the front
of the head section, starting with one side
(Fig. D) and remove the head section.
B
D
WARNING! The interior padding is cri-
tical to maintain the correct fit of
the helmet on your head. If you have any
doubt whatsoever regarding the removal or
replacement of the interior padding, DO NOT
USE YOUR HELMET. Contact your retailer
for assistance or advice. NEVER use your
helmet with any part of the interior padding
removed. The helmet will not protect you in
an accident.
TEXTILE PARTS
9