shark S-DRAK 2 Manuel D'utilisation page 14

MASK
A
C
Disassembly:
- Lift the visor into its upper position
(Photo A).
- Push the button and pull the mask while
holding it by the end closest to the clip
(Photo B).
Assembly:
- Clip the mask laterally first on one side
then on the other (Photo C).
- Lower the visor until making contact
with the sealing ring (Photo D).
14
B
D
WARNING! If you are not sure
that you properly replaced the
sun shield, do not use the helmet. The
sun shield could suddenly and wit-
hout warning become detached from
the helmet while riding, causing you
to lose control of your motorcycle, re-
sulting in an accident, personal injury,
or death. Contact your retailer for any
assistance or advice.
NEVER ride with the sun shield as eye
protection. You must always ride with
the visor in the lowered position, as
described in the previous section.