BX 11 | BX 11 S
| Adaptive wheelchair
6.5. Check before setting off
6.5.1. Checking the brakes
Before each journey, check that the brake system is functioning pro-
perly.
When the brakes are applied, the wheelchair cannot be pushed away
on a dry surface. When the brakes are released, the wheelchair moves
without grinding noises and with good directional stability.
If this behaviour does not apply, inform your specialist dealer immedia-
tely and remove the wheelchair from service until it has been repaired!
6.5.2. Checking the tyres
Before each journey, check the tyres for integrity and correct air pressu-
re (see chapter 4.8.2).
88
Adaptive wheelchair |
7. Technical data
Dimensions
BX 11
Total length with leg
Min. 910 / Max. 1130
supports (mm):
Total length without leg
Min. 910 / Max. 1030
supports (mm):
Width (mm) (with wheel
Min. 550 / Max. 750
camber 0°):
Height (mm):
Min. 900 / Max. 1025
Width folded (mm):
Min. 320 / Max. 340
Height folded (mm):
Min. 835 / Max. 875
Length folded (mm):
Min. 910 / Max. 1030
Handle height (mm):
800 - 950
Lower leg length (mm):
430 - 535 (BX 11)
Footboard angle (°):
+/- 25 (BX 11)
+/- 10 (BX 11S)
Seat width (mm):
360 - 520 with 20 mm steps
Seat depth (mm):
380 - 540
Front seat heigth (mm):
490 - 560 wiht 10 mm steps
Rear seat height (mm):
420 - 520 with 20 mm steps
Angle:
Seat level (°):
0 - 15
Leg to seat surface (°):
75
Back rest angle (°):
-9 bis 15
Back height without seat
300 - 450 with 25 mm steps
cushion (mm):
Bischoff & Bischoff GmbH 2024-08-13 - Revision: 3
BX 11 | BX 11 S
BX 11S
Min. 990 / Max. 1135
Min. 950 / Max. 1100
Min. 550 / Max. 750
Min. 835 / Max. 1020
Min. 320 / Max. 340
Min. 835 / Max. 875
Min. 950 / Max. 1100
800 - 950
430 - 510 (BX 11S)
+/- 25 (BX 11)
+/- 10 (BX 11S)
360 - 520 with 20 mm
steps
380 - 540
490 - 560 with 10 mm
steps
420 - 520 with 20 mm
steps
0 - 15
75
-9 bis 15
300 - 450 with 25 mm
steps
89