Publicité
BX 11 | BX 11 S
| Adaptive wheelchair
Mounting the tyre casing and the tube:
1. First put one half of the casing over the rim flange on the side
opposite the push rim.
52.
2. At the point provided for fitting the valve, press down the casing
bead, making sure that the casing remains above the rim around the
rest of the wheel. Then insert the valve through the hole provided.
53.
3. Place the casing lifter behind the casing bead and carefully lever
the casing over the hose. Be careful not to crush the hose.
54.
4. Hook the casing lifter into the spoke. Be careful not to damage the
tube.
55.
100
Adaptive wheelchair |
5. Now stuff the tube all the way around the tyre under the casing.
6. Ready mounted hose.
7. If the valve is not straight, bring it into a straight position by
pushing the valve in the desired direction. You can support this by
rolling the jacket.
Bischoff & Bischoff GmbH 2024-08-13 - Revision: 3
BX 11 | BX 11 S
56.
57.
58.
59.
101
Publicité
