Publicité
DIVA UTOPIA
U s e r m a n u a l
To facilitate the Focal-JMlab warranty,
it is now possible to register your product online at: www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure
are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we
recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.
Package contents (fig. 7)
With DIVA UTOPIA, it is possible to:
• Listen to thousands of internet radio stations.
• Play audio using AirPlay ®.
• Play audio using Spotify® Connect, TIDAL Connect (a TIDAL subscription is required), Qobuz (a Qobuz subscription is
required).
• Play audio wirelessly using Bluetooth® with SBC, aptX® and AAC codecs from any compatible playback device.
• Play audio from UPnP™ music servers.
• Play audio from, or stream audio to, other Focal or Naim streaming products.
• Play music from a TV via HDMI eARC CEC.
• Play music from an analogue or digital source with a wired connection.
INSTALLATION
Unpacking and Handling
Be careful when moving DIVA UTOPIA products. Use the handle accessible at the rear of the product to move the loudspeak-
ers (fig. 5, 6). Two people are required to move the speakers.
Follow the steps for unpacking the products.
• Place the loudspeaker boxes horizontally (fig. 1, 2).
• Open the box (fig. 2).
• Remove the wooden board and the wedges (fig. 3).
• Place the wooden board under the loudspeaker then turn the box back upright (fig. 4, 5).
• Carefully pull the loudspeaker by the base to remove it from the box (fig. 5).
• Remove the last wedge and the protective cover (fig. 6).
• Position the loudspeakers in the chosen listening space, for more details see: Recommendations for use/Sound optimisation
(fig. 13, 14, 15).
• Add decoupling spikes under the base of each DIVA UTOPIA loudspeaker to ensure good stability and improve decoupling
from the floor (fig. 12).
• Gently tilt the DIVA UTOPIA loudspeakers onto one side (fig. 12).
• Screw the first two decoupling spikes onto the base of the DIVA UTOPIA loudspeakers on the front and back of the product
(fig. 12).
• Gently tilt the DIVA UTOPIA loudspeakers onto the other side (fig. 12).
• Screw the remaining two decoupling spikes onto the base of the DIVA UTOPIA loudspeakers on the front and back of the
product.
• If the floor is delicate (parquet, tiles, etc.), 8 floor protectors are supplied with the products. The use of these floor protectors
is necessary to ensure the loudspeakers are perfectly stable. Be sure to position the floor protectors correctly underneath the
DIVA UTOPIA loudspeaker's decoupling spikes.
Power on (fig. 16).
DIVA UTOPIA loudspeakers are supplied with the appropriate mains cables for the countries in which they are marketed.
Be careful when accessing the mains power sockets on the rear of the product.
1. Locate the power supply connector on the rear panel of the DIVA UTOPIAs.
2. Insert the power cable into the socket and connect it to the power supply.
3. The speakers will turn on automatically.
For the purposes of improvement or to take into account any legal or regulatory changes, FOCAL-JMLab reserves the right to modify the technical spe-
cifications of its products without prior notice. Where applicable, the images shown are intended for illustration purposes only, and may differ slightly
from the product sold.
29
29
Publicité
