Télécharger Imprimer la page

Cristec YPOWER 12V/40A Manuel Utilisateur page 52

Masquer les pouces Voir aussi pour YPOWER 12V/40A:

Publicité

5
T
ECHNICAL SPECIFICATIONS
12V-40A, 12V-60A
Part Number
Model
recommended battery bank*
Input
Voltage
Frequency
Input current consumption 230/115VAC
Recommended power for a generator
Power factor
Efficiency
Input fuses
Output
Number of battery banks
Nominal current (+/-7%) / Rated Power
Charging curve
Battery type
Boost voltage
Floating voltage
Peak to peak ripple and noise
Automotive output fuse mounted in series
in minus pole -BAT
Environment
Cooling
Sound level
Operating temperature at 230VAC
Storage temperature
Relative humidity
Casing
Material
Dimensions (length, height, depth) / Weight
Fixing center distance
Fixing screw (wall)
Protection factor
Electronic card protection
Standards
CE declaration of conformity
CE / EMC MARK
CE / Security MARK
Protections
Communication
Options
*Recommended battery capacity for lead type batteries, ratio C/10. Consult us for lithium batteries capacity
YPO12-40STPL/(OEPL)
12V-40A
300-500Ah
from 90 to 265VAC single-phase automatic
2.7/5.6A
700W
4 separate positive terminals : +BAT E, +BAT 1 et +BAT 2 +BAT3 (integrated Mosfet splitter) / 1
40A/570W
IU or IUoU through internal push-button, Bluetooth or CAN-Bus
Lead sealed as factory setting - Gel, AGM, calcium lead, LiFePO4, DC power-supply mode, etc.
14.4VDC for lead sealed battery (factory setting)
13.8VDC for lead sealed battery (factory setting)
3 x 30A/32V
(F400, F401, F402)
From -20°C to +60°C, derating above 60°C.
up to 70% (95% without condensation)
Casing comprises 3 parts: Aluminium sink frame / Thermoplastic body / Aluminium clasp
Water-repellent varnish (marine environment)
- Against transient input overvoltage by varistor (out of warranty)
- Against output polarity inversions by fuse
- Against short-circuits and output overloads
- Against abnormal overheating
CANBUS / Bluetooth as standard (optional on OE version)
Temperature probe / Bluetooth dongle (OE versions)
YPO12-60STPL/(OEPL)
from 47 to 65Hz automatic
1
Greater than 90%
T15A/250V – 6.3x32 (F101)
-BAT negative terminals
< 2% (at rated conditions)
(F400, F401, F402, F403)
fanless
0
From -20°C to +70°C
289 x 195 x 106 mm / 3.74kg
272 x 170 mm
4 x M5 round head screws
IP22
Available on request
EN61204-3
EN60335-2-29, ISO8846
12V-60A
500-700Ah
4.4/8.7A
1050W
60A/855W
4 x 30A/32V
51

Publicité

loading

Ce manuel est également adapté pour:

Ypower 12v/60a