1
P
– W
RECAUTIONS
The CRISTEC equipment includes the following:
•
A box containing the battery charger's electronic function.
•
AC input connector (Except OE VERSION)
•
DC output connector (Except OE VERSION)
•
This user manual
•
Specific packing
This document applies to battery chargers from the
website
www.cristec.fr/
The manual is intended for users, installers and equipment maintenance staff. Please read this manual carefully before
working on the charger.
This manual should be kept safely and consulted before attempting any repairs because it contains all the information
required to use the appliance.
This document is the property of CRISTEC; all the information it contains applies to the accompanying product. CRISTEC
reserves the right to modify the specifications without notice.
P
(
1.1
RECAUTIONS
Material class I according to NF EN 60335-2-29 standards.
The requirements for installation are contained in the NFC 15-100
standards and in the specific standard "for small crafts – electrical
systems– Alternating and direct current installations" ISO13297
reference.
The installation must be carried out by an electrician or a
professional installer.
It is essential not to install, repair, start any maintenance or
cleaning on this device under voltage. All energy sources must
be turned off. The batteries must be isolated by the battery
disconnect switches according to the standard. Chargers,
alternators, or other energy-generating devices must be turned
off, or isolated.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
ARRANTY
) –
WARNING
PROVISIONS RELATING TO SAFETY
range as listed on the cover, available in colour on our
28