Horizon Hobby UTB18 CAPRA Manuel D'utilisation page 27

EN
RANGE-CHECKING THE RADIO SYSTEM
The radio system should be checked before operating the vehicle to ensure proper operation and adequate range.
1. Turn on the transmitter.
2. Connect the battery in the vehicle.
3. Have a friend hold the vehicle while keeping hands and loose clothing away from moving parts.
4. Walk away until you are at the maximum planned operating distance from the vehicle.
5. Turn the steering wheel side to side and operate the throttle, both forward and reverse, checking for any
erratic behavior.
6. If any erratic behavior is exhibited, DO NOT operate the vehicle. Call customer service for assistance.
VEHICLE MAINTENANCE
Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak performance. Preventative maintenance
will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain your vehicle.
Replace any
noticeable bent or
broken parts
Check the wheel nuts
for tightness
Check the receiver
antenna for damage
Check for wear on Check driveshaft
the ball joints in set screws and
the steering and apply thread
suspension links locking compound if
(replace if necessary) necessary
Ensure the wheel Keep the chassis free
beads are still firmly of dirt and debris
bonded around the
entire circumference
of the rim
Check the steering
operation for any
binding
www.modellmarkt24.ch
Inspect shock
absorbers for smooth
dampened operation
Check for loose
screws on the chassis,
especially the knuckle,
C-hub and axle lockout
screws
Inspect the spur
and pinion gears for transmitter batteries
damage when indicated by
the transmitter, as
described in the
Transmitter Functions
8
Check for any loose
connections or frayed
wiring
Check the driveline
for smooth, bind free
operation
Replace the
section