Horizon Hobby UTB18 CAPRA Manuel D'utilisation page 26

INSTALL THE VEHICLE BATTERY
1. Power on the transmitter.
2. Press up on the hood from behind the front bumper to release the
hood latch. Raise the hood.
3. Connect the battery to the ESC.
4. Place the battery in the battery tray.
5. Close the hood and press down on the center to latch it to the
chassis. The battery is secured in place by the hood.
NOTICE: Always disconnect the battery from the ESC before
powering off the transmitter. Loss of vehicle control may result.
Power
www.modellmarkt24.ch
7
EN