Publicité
SETTINGS
Setting the acoustic signal and lock parameters
You can adjust the volume of the acoustic signal, duration of acoustic alarm,
and automatic lock settings.
Activate the setting menu:
1. Switch off the appliance.
2. Press and hold the Stop & Go key for approx. 3 seconds.
▷
The first parameter "Uo" will appear on the timer display, indicating the volume
(loudness) of acoustic signals.
Press the '–' or '+' timer keys to select the type of parameter:
Uo - acoustic signal and alarm volume (loudness)
▷
▷
So - alarm duration
Lo - Automatic lock
▷
•
The currently set value will appear on the right cooking zone power level displays.
The value can be adjusted by pressing the '–' or '+' keys for the front right cooking zone.
•
All parameters can be confirmed and stored by pressing and holding the
Stop & Go key for 2 seconds. Then, a short beep will be heard.
•
If you do not wish to store the new parameter settings, close the user settings
mode by pressing the on/off key.
EN 16
Publicité
