Publicité
CV
Explanation
PoM
56
Motor feedback control – feedback control influence
Steam locomotive sound interval of the steam
PoM
57
chuffing at speed level 1
Steam locomotive interval of the steam chuffing
PoM
58
starting at speed level 2,
PoM
63
Total volume
PoM
64
Brake squealing threshold
PoM
66
Forward trim
PoM
67
Speed table speed level 1 (Vmin) to
-
PoM
94
speed table speed level 28 (Vmax)
PoM
95
Reverse trim
PoM
145
Switching range
PoM
Sound output: Volume of squealing brakes
146
PoM must be supported by the locomotive controller / central
controller.
48
CV Table for DCC
Values
Default
0 - 255
255
0 - 255
30
0 - 255
90
0 - 255
255
0 - 255
35
0 - 255
128
0 - 255
0 - 255
128
0 - 128
128
180
0 - 255
Notes
0 = PWM without feedback control for
Sine (see also CV 52 motor type)
Total volume for all sounds.
0 = no sound
The higher the value the sooner the
squealing begins, the lower the value the
later the squealing begins. If the value is
too low, no squealing is activated..
The CV value divided by 128 gives the fac-
tor with the speed level is multiplied when
the locomotive is running forward.
The CV value divided by 128 gives the fac-
tor with the speed level is multiplied when
the locomotive is running in reverse.
128 = 50% of speed level, 64 = 25% of
speed level
Publicité
