Télécharger Imprimer la page

Agilent Technologies TV 401 NSF Notice De Mode D'emploi page 233

Publicité

TV 401/301/21 NSF Switching off
To switch off the TV 401/301/21 NSF it is necessary to remove the
mains. The integrated controller immediately stops the pump.
WARNING!
The Turbo-V controller must be powered with 3-wire power cord (see
orderable parts table) and plug (internationally approved) for user's safety.
Use this power cord and plug in conjunction with a properly grounded power
socket to avoid electrical shock and to satisfy CE requirements. High voltage
developed in the controller can cause severe injury or death. Before servicing
the unit, disconnect the input power cable.
Emergency Stop
To immediately stop the TV 401/301/21 NSF in an emergency
condition it is necessary to remove the supply cable from the mains
plug.
TV 401/301/21 NSF User Manual / 87-900-995-01 (C)
Instructions for Use
Use
233/294
16

Publicité

loading

Ce manuel est également adapté pour:

Tv 301 nsfTv 321 nsf