Publicité
57
Please note:
The distance between the hob and the rear wall must be at least 50 mm .
n
2 . Make a hole in the side of the kitchen cabinet to enable the gas pipe to be
passed through .
3 . Place the appliance in the cut-out .
4 . Secure the appliance in position .
5 . Make the gas connection . Check the gas connections with a soap/water
mixture (see "Gas Connection") .
6 . Put the plug in the socket (see "Electrical Connection") .
7 . Test to check the appliance is operational .
The building in of the hob in combination with a built-in oven is described in
the installation guide for the oven .
Attention:
The underside of this built-in hob becomes hot . Take care that you do not
n
place any flammable or plastic objects in any drawer under the appliance .
Publicité
