Publicité
installation instructions
54
General
The fitting of the appliance should only be carried out by a registered Corgi
gas fitter .
Please note:
This appliance is not connected to a flue duct . Take care to ensure that there
n
is sufficient ventilation .
Do not install a hob next to a high cupboard or wall made of flammable
n
material . (If there is no alternative, ensure that there is a minimal distance of
100 mm between the outer edge of the hob and the wall in question .
Also ensure that there is a minimum distance of 650 mm between the hob
and any overhead extractor fan which may be installed .)
Electrical connection (solely for appliances with a
spark switch)
Electrical connection: 230 V - 50 Hz .
This appliance complies the regulations concerning electromagnetic
compatibility in directive 89/336/EEC .
The electrical connection must comply with national and local regulations .
n
Wall socket and plug must be accessible at all times .
n
If you want to make a fixed connection, ensure that a multi-pole switch with a
n
distance between contacts of 3 mm is installed in the supply cable .
Please note:
This appliance must be earthed .
n
If the connection cable becomes damaged, it should be replaced by
n
the manufacturer's service department or by a person with equivalent
qualifications, in order to prevent dangerous situations from arising .
Publicité
