Recording A Songs (Record Mode) - Viscount Cantorum Duo Mode D'emploi

User Manual
USING RECORDED AND/OR MODIFIED SONGS WITH DEDICATED SOFTWARE
MIDI files recorded by the internal sequencer can be modified with the most common MIDI editing
softwares. This might prove useful to correct errors of the recording or to generally improve the track.
However, we strongly advice inexperienced users not to do so.
When modifying a MIDI file, please follow these rules:
-
Do not modify the tracks channel. If it necessary, respect the internal sequencer channelling. The
sections are channelled as follows:
 Pedal: 1
 Man.I: 2
 Man.II: 3
The internal sequencer also assigns a name to the track while recording, that corresponds to the
sections playing a track. Most computer software can read the track names:
 "Pedal" track: Pedal
 "Great" track: Man.I
 "Swell" track: Man.II
 "Volumes" track: divisional volumes and expression pedal
 "Stops" track: stops conditions
There are other tracks for internal use and future developments only, that should not be altered.
-
Divisional modules are recorded as Control Change 7 events. Expression pedals position as Control
Change 11. These Control Change channel are identical to the previous ones.
-
The stops settings, together with cancel, enclosed, coupling settings etc. are recorded as System
Exclusive. We advice you not to alter these codes. If you wish to add or remove stops from a
recording, you should know its exclusive system code. To do so, you should monitor the MIDI OUT
port of the organ and, switching on and off a stop, check the MIDI code transmitted. Add or remove
this code only from the "Stops" track.
-
When saving the MIDI file do not change the resolution of 384 tpqn (tick per quarter note).
The sequencer can also paly non-recorded tracks. Again, keep in mind that:
- The track channelling may not be consistent with the internal sequencer. Reset the channels according
to what described above.
-
Stop codes might not be present in a MIDI track. In this case we advice you overdub (see par. 8.3)
with the desired stop combination.
-
Divisional volumes and expression pedal may be lacking from a MIDI track. Again, we advice you
overdub the tracks.

8.2 RECORDING A SONGS (RECORD mode)

In the sequencer mode video page, select the RECORD field. The display will show:
As in Play mode, the screen again carries information about the functions of the buttons:
-
[ENTER]: pause /restart recording.
-
[EXIT]: stop recording.
EN - 34