Regulating The Notes Velocity (Velocity Sens. Function); Combinations Operating Functions (Combinations Function) - Viscount Cantorum Duo Mode D'emploi

For each section, set a fixed value (FIXED from 1 to 127) or three dynamic curves: SOFT, NORMAL or
HARD. Press [EXIT] to leave and save the settings.
5.5 REGULATING THE NOTES VELOCITY
(VELOCITY SENS. function)
This function sets the velocity of the notes played with Orchestra stops and transmitted through [MIDI
OUT] port, for each section.
For each section, set a fixed value (FIXED from 1 to 127) or three dynamic curves: SOFT, NORMAL or
HARD.
Press [EXIT] to leave and save the settings.
5.6 COMBINATIONS OPERATING FUNCTIONS
(COMBINATIONS function)
The user can choose the set up of combinations and Tutti. To do so, access the SETTINGS menu and
then select the COMBINATIONS field.
The available parameters are:
o SAVE ENC+AP: activate (select YES) or deactivate (select NO) the option to save the status of the
[ENC] and [A.P] pistons (see point 12 chapt. 2) to general combinations.
o SAVE ST/TR/OR: save organ Styles, tremulant Depth and Speed values, and orchestra stops with
the following options:
-
NONE: does not save organ Styles, tremulant parameters, orchestra stops.
-
STYLE: save the currently selected organ Style (to select Style see point 10 at chapt. 2) so that it
can be recalled by general combinations and Tutti.
-
TREM: save the current tremulant Depth and Speed values (to adjust the tremulant values see
par. 6.1) so that they can be controlled through general combinations and Tutti.
-
ORCH: save the currently selected orchestra stops (to select them see par. 6.3) so that they can be
controlled through general combinations and Tutti.
-
TR+OR: save the tremulant Depth and Speed values (to adjust the tremulant values see par. 6.1)
and the currently selected orchestra stops (to select them see par. 6.3) so that they can be
controlled through general combinations and Tutti..
Press [EXIT] to leave the screen and save the current settings.
EN - 17
User Manual