Once the save option has been selected, the following page appears:
where it is possible to give a name to the saved file. To select the characters, use the buttons [VALUE +]
and [VALUE -], to move the cursor use the buttons [FIELD
complete, press [ENTER] to save the file.
When the saving procedure has been successfully completed, the message "FILE SUCCESFULLY
SAVED" will appear.
N.B.
-
When a single Style is loaded, it can only replace a Style of the same type (a Baroque Style
replaces Baroque, Romantic replaces Romantic etc.). To identify Styles easily, the system
always suggests the Style type as file name when saving Styles.
-
If there is already a file with the same name and extension in the USB drive, you have the
option to overwrite that file; the system shows the following message: "FILE ALREADY
EXISTS". Now press [ENTER] to proceed or [EXIT] to enter a different name. Please keep in
mind that overwritten files will be lost and the data contained within cannot be recovered.
-
In the case of "FILE SAVE FAILED" error, retry the operation. If the error occurs again,
check that there is enough space in the USB stick. If the error still occurs, the USB stick could
be damaged so try using a different stick or format it with a computer.
] and [FIELD
EN - 31
User Manual
]. When the name is