User Manual
Press [EXIT] to quit the screen. The display will show:
Warning you that the overdubbing will be lost. Press [ENTER] to continue – and therefore discard the
recording – or [EXIT] to return to the previous screen.
N.B.
-
The system displays the error message "USB PEN NOT PRESENT" when trying to save a
MIDI sequence without a USB drive connected to the instrument, or when the pen drive has
not been recognized. Should this happen, check that the pen drive is not damaged and has the
correct format.
-
The error message "FILE LOAD FAILED" means that the file is damaged or bigger than
128 KB (maximum files size that you can overdub).
-
In the case of "FILE SAVE FAILED" error, retry the operation. If the error occurs again,
check that there is enough space in the USB stick. If the error still occurs, the USB stick could
be damaged so try using a different stick or format it with a computer.
ACCEPT
1
05:20
ORIGINAL
03:10
OVERDUB
05:20
NEW
2
05:20
ORIGINAL
06:00
OVERDUB
06:00
NEW
EN - 38
TRIM AND ACCEPT
1
05:20
ORIGINAL
03:10
OVERDUB
03:10
NEW
2
05:20
ORIGINAL
06:00
OVERDUB
06:00
NEW