Installing The Effective Load - Festo ELGL-LAS Notice D'utilisation

6.3

Installing the effective load

Take into account the permitted forces and torques (see chapter "Technical
data"). The forces and torques represented in the graph result from your ap-
plication. These are dependent on the following forces:
Forces due to weight (effective load/mass)
•
Inertial forces (effective load/mass)
•
Feed force
•
Counteracting forces
•
Fig. 24
The resulting forces and torques on the air cushion bearing depend on the dy-
namics (braking/acceleration).
Observe the following to prevent vibrations:
Place the centre of gravity of the effective load if possible centrically to the
•
stator.
Place the effective load such that the tilting torque from the force and lever
•
arm remains low.
Fasten the effective load directly onto the slide.
•
47
FESTO ELGL-en 0904NH