Bosch MUM58720 Mode D'emploi page 9

Before use, read these instructions
carefully in order to become familiar with
important safety and operating instruc-
tions for this appliance.
Please keep the operating instructions in a
safe place. If passing on the appliance to
a third party, always include the operating
instructions. The instructions describe differ­
ent features of the accessory as well as its
use on different appliances.
Overview
Please fold out the illustrated pages.
Fig. A
1 Blade guard
2 Blade insert with grinding blade
(black seal, metal base)
3 Blade insert with blender/cutting
blade (red seal, plastic base)
4 Blade holder
Grinding/cutter attachment
1)
5 Lid
6 Glass container
With attached lid suitable for storage in
the refrigerator.
Blender attachment
7 Lid
With closable mouthpiece (ToGo).
8 Plastic container
Can be used as a drinking cup.
1)
Number varies depending on model.
2)
For some models.
Fig. B
Operating position on the base unit
Fig. C
Combination options of the attachments
(depending on model):
a Grinding function =
Blade holder (4) + blade insert with
grinding blade (2) + glass container (6)
b Cutter function =
Blade holder (4) + blade insert with
cutting blade (3) + glass container (6)
c Blender function =
Blade holder (4) + blade insert with
blender blade (3) + plastic container (8)
1)
2)
Operation
■ Before using for the first time, thoroughly
clean all parts, see "Cleaning and care".
Fig. D X MUM5...
Fig. E X MUMX...
Preparing the attachment
Detail images 1-5
■ Put ingredients into the container.
Do not exceed max mark!
■ Grip blade insert on the blade guard and
insert into the blade holder. Press it down
into place.
■ Remove the blade guard.
■ Place blade holder on the container and
close by turning it anti­clockwise.
Tip: To facilitate locking the blade holder,
moisten the seal of the blade insert with a
little water or cooking oil.
■ Check that the red locking lever on the
blade insert is completely locked (detail
image 5). If it is not completely locked,
the attachment cannot be placed on the
base unit!
■ Turn the attachment over.
Working
Detail images 6-11
■ Press release button and move swivel
arm to vertical position.
■ Cover unused drives with drive covers.
■ Remove the blender drive cover.
■ Put on attachment (arrow on the blade
holder points to arrow on the base unit)
and press downwards (detail image 8).
■ Turn attachment all the way anti­ clock­
wise (dot on the blade holder points to
arrow on the base unit, detail image 9).
■ Insert the mains plug.
■ Turn rotary switch to setting M and
hold. The longer the appliance remains
switched on, the finer the ingredients
are cut.
In the case of herbs the required cutting
result can be achieved very quickly after
switching the appliance on. A brief "tap" on
setting M may be adequate.
en
Overview
9