Publicité
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K determined according to EN 60335-2-79
h
– Vibration emission value a
h
– Uncertainty K
Mounting and Operation
Representation/Action Ob-
jective
Delivery scope Advan-
cedAquatak 150/160
Adjusting the Handle
Connecting high pressure wa-
ter supply hose/nozzle
Connecting to the water supply
Starting
Stopping
Clean both filters
Clean nozzle
Connecting high pressure gun
to lance
Attaching Nozzle
Connect detergent bottle
Variable Fan lance
Connecting high pressure gun
to lance
Adjust water jet
Roto lance
Connecting high pressure gun
to lance
Adjust water jet
Gun storage
Storage
Transport
Selecting accessories
Switching on
For Your Safety
Warning: Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
Bosch Power Tools
dB(A)
dB
2
m/s
2
m/s
The operating voltage is 230 V AC, 50 Hz (for non-EU coun-
tries 220 V, 240 V as applicable). If in doubt contact a quali-
fied electrician or the nearest Bosch Service Centre.
Figure
Page
For products not sold in GB:
Warning: For your safety, it is required that the plug at-
A
215
tached to the product is connected with the extension cord.
The coupling of the extension cord must be protected
B
216
against splash water, be made of rubber or coated with rub-
ber. The extension cord must be used with a cable strain re-
C
216
lief.
Products sold in GB only:
D
217
Your product is fitted with an BS 1363/A approved electric
E
218
plug with internal fuse (ASTA approved to BS 1362).
F
218
If the plug is not suitable for your socket outlets, it should be
G
219
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
H
219
should have the same fuse rating as the original plug.
I
220
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
J
220
socket elsewhere.
K
221
Operation
L
222
To prevent damage to the appliance, do not allow it to op-
u
erate dry.
Starting
M
223
Attach water supply hose (not supplied) to the mains water
supply and machine.
Connect the product to the mains supply ensuring that the
mains switch is in the off position.
Open water tap.
N
224
Press the safety lock (back button on the gun handle) to re-
O
224
lease the trigger. Fully press the trigger until there is a con-
P
225
stant flow of water to clear the air from the machine and wa-
ter supply hose. Release trigger. Press the safety lock (front
Q
226
button on the gun handle).
Turn button on main switch. Point the power gun down-
wards. Press the trigger safety lock to release the trigger.
Fully press the trigger.
Autostop Function
The machine is designed to switch off the motor when the
trigger is released on the gun.
English | 13
3 600 HA7 7..
3 600 HA7 8..
77
2,0
3,2
1,0
F 016 L81 291 | (24.11.2022)
79
2,0
2,9
1,0
Publicité
