Publicité
FIRE PIT CONFIGURATION
– See assembly guide page 20.
Operating your barbecue
1.
Decide at what height you want to use the
4GRILL.
a.
Low:
b.
Medium:
c.
High:
2.
Remove the lid, cooking grid & cross bar
before building the fire.
Use the special fire pit insert (Part R)
3.
inside the charcoal pan.
ATTENTION:
When the 4GRILL is used as a fire pit
you have to place the special fire pit
insert (Part R) in the charcoal pan (Part O).
This insert has the function to limit the
temperature radiation to the outer barrel
segments of the 4GRILL and protecting the
4GRILL segment surface from getting per-
manently damaged!
Do not place any barrel segment
(Part B and/or Part C) on top of the
segment which contains the char-
coal pan (Part O) and the fire pit insert (Part
R). Otherwise the heat radiation or open
flames can cause permanent damage to the
upper barrel segments.
Do not overfill the insert, causing a
too big fire. The heat radiation can
become too high causing the
heat-resistant labels to deform and decol-
orize as well as to permanently damage the
coated barrel segments.
At no times place the lid (Part A+)
on the fire pit insert or on any of the
4GRILL segments in this consider-
ation, as this will damage the lid surface
finish permanently.
EXTINGUISHING OF FIRE
a.
SLOW COOKING and SMOKING
CONFIGURATION
When the preparation of the food has been
finished successfully the lid can be placed
back on top of the 4GRILL, with the air vent
closed.
This procedure is only allowed in the Slow
Cooking and/or Smoking Configuration, where
the Charcoal pan is positioned in the bottom
barrel segment (means in lowest possible
position).
The charcoal or briquettes will extinguish by
itself.
b.
GRILLING and FIRE PIT
CONFIGURATION
In the BBQ Configuration and/or Fire Pit Con-
figuration it is at no times allowed to place the
lid on top of the 4GRILL as this will damage the
lid surface finish permanently.
English
9
Publicité
