Publicité
en-us Installation procedure
¡ If the inside of the cabinet is no wider than 29 ½"
(750 mm), make cutouts in the side panels.
min. 3¾"
(95)
¡ If the appliance is installed in an island unit or another
installation that is not described here, you must ensure
that the cooktop is sufficiently ventilated.
4 Installation procedure
Installation procedure
Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
▶
CAUTION
The appliance is heavy.
It is recommended that two people install this appliance.
▶
4.1 Installing the heat shield
For safety reasons, the heat shield must be properly
installed when closed cabinets are used. This prevents
components from overheating as a result of the
recirculation of hot air from the cooktop. The heat shield is
the same width as the cooktop.
CAUTION
Sharp edges.
Use protective gloves when installing the heat shield.
▶
Requirement: You have unpacked the cooktop.
8
For shipping, the heat shield is screwed to the bottom of
▶
the cooktop. Unscrew the fastening screw on heat
shield.
a The heat shield will be able to rotate freely.
4.2 Securing the cooktop to the countertop
The cooktop must be secured from below using the hold-
down brackets provided, so it does not slip.
Place the cooktop face down on a soft underground.
1.
Publicité
