Accessories; Before Fi Rst Use - Cleanmaxx GW906-S60 Mode D'emploi

Accessories

To mount the attachments:
• Adapter1 (3) is needed for all attachments. It is inserted in the suction opening (I).
• Adapter 2 (6) is needed for all small attachments. It is fi tted on adapter 1 (3).
For large surfaces/fl oors:
For narrow areas that are hard to access (e.g. corners, niches, between cushions):
• Large and small crevice nozzle (4, 10)
• Suction tube (9)
For cushions, textiles and sensitive objects (e.g. picture frames, lamp shades, key-
boards, books):
• Large and small brushes (5, 11, 12)
For convenient handling:
• Angle piece (7) for all small attachments
• 2 x connectable extension tube (8) for all small attachments
• 2 x extension suction tubes for all large attachments
Before fi rst use
PLEASE NOTE!
■ Never remove the rating plate and any possible warnings!
1. Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents") and that no damage has occurred during transport. Do not use
the device if the parts are damaged (!), instead contact customer service.
2. Before you use the device, remove all packaging material and any labels located on
the device and which serve to provide protection during transport or are for advertis-
ing purposes.
Any dirt residue in the dust bin is attributed to previous testing of this device be-
fore delivery and does not constitute a defect!
19
• Floor nozzle (13) for vacuuming fl oors; with a foot switch
for switching between a carpet and hard fl oor. A brush on
the bottom side is deployed for hard fl oors.
EN