SilverCrest SDM 1500 D3 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 12

Choose the desired accessory:
Accessories for:
Extension nozzle
Angle nozzle
Scraper
Oblong brush
Large round brush
Small round brush
NOTE: The small round brush 11 is made of
copper alloy . Be careful during use not to leave
scratches on the cleaning surface .
Put the extension nozzle 13 into the selected
accessory 5 , 6 , 7 , 9 , 11: Place the smaller
protrusion on the extension nozzle into the arrow
on the accessory . Hold the extension nozzle
firmly . Turn the accessory anti-clockwise until the
arrows on extension nozzle and accessory are
aligned (fig . A) .
Upholstery attachment installation
Align the locking hole of the upholstery
attachment 10 with the release lever 17 of the
handheld unit 22/extension hose 2 .
Push in the upholstery attachment 10 until it locks
in place .
12 GB/IE/NI
Suggested place
of use
13
5 Hard-to-reach areas
6 Removing residues from
hobs
7 Grout lines
9 Hobs, showers,
refrigerators, etc .
11
Choose the desired accessory:
Accessories for:
Upholstery
attachment
Microfiber cover
Squeegee attachment 12 Shower screens,
˜ Operation
˜ Filling the water tank
m
DANGER! Risk of electric shock! Always
disconnect the power plug 23 from the wall
socket before filling the water tank 18 .
m
CAUTION! Fill the water tank 18 with tap water
or distilled water without any additives . If your
tap water is hard, use distilled water . Where the
water is moderately hard, mix distilled water and
tap water (ratio of 1:1) .
NOTES:
Checking the water hardness: Use a test strip or
ask the water supplier .
Do not exceed the water tank's 18 maximum
capacity of 350 ml .
Open the water tank cover 18 .
Use the filling cup 4 and the funnel 3 to fill the
water tank 18 .
Close the water tank 18 .
˜ Turning on/off
Connect the power plug 23 with a suitable wall
socket .
Suggested place
of use
10
8 Sofas, tablecloths,
garments
mirrors, glass