SilverCrest SDM 1500 D3 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 11

Protect the product against heat .
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances .
˜ Before first use
Remove all packaging materials . Check if all
parts are complete .
˜ Assembly
˜ Unfolding/folding the handle
Handle
Unfold the handle until it clicks in
Unfolding
place .
Press the folding button 25 . Then,
Folding
fold the handle downwards .
˜ Attaching the steam foot
Align the locking hole of the steam foot 16 with
the release lever 17 .
Push in the steam foot 16 until it locks in place .
NOTE:
The angle of the steam foot 16 can be adjusted:
Steam foot
Release steam Gently step on the steam foot . Pull
foot the main body backwards .
Lock steam Pull the main body forward until the
foot steam foot locks in place .
Do not force the steam foot 16 onto the main
unit . Always use both hands while connecting the
parts .
Microfiber cloth installation
(for cleaning floors)
Place the microfiber cloth 14 on the steam
foot 16 . Align the hook-and-loop straps of the
microfiber cloth with the hooks on the steam foot .
Carpet glider installation
(for cleaning carpets)
Attach the microfiber cloth 14 . Place the carpet
glider 15 onto the steam foot 16 until it locks in
place .
1
˜ Using as a handheld steamer
Press the eject button 24 . Pull out the handheld
unit 22 .
Extension hose installation
The extension hose 2 is useful for hard-to-reach
areas .
Installing the extension hose 2 : Align the locking
hole with the release lever 17 of the handheld
unit 22 .
Push in the extension hose 2 until it locks in
place .
Extension nozzle installation
Align the locking hole of the extension nozzle
16
13 with the release lever 17 of the handheld
unit 22/extension hose 2 .
Push in the extension nozzle 13 until it locks in
place .
GB/IE/NI 11